IR Thermometer
No reviews yet
$89.95
-
To measure the temperature of the glass, simply point the IR Thermometer at the glass and hold down the trigger. An accurate temperature will appear on the digital display.
Note: Photos shown are for illustration purposes only. Actual product may vary due to product enhancements and adjustments.
How to Remove a Scratch
Step One
Apply Polishing Compound
Apply Polishing Compound to the Polishing Disk.
1/6
![Apply Polishing Compound to the Polishing Disk](https://glasweld.com/wp-content/uploads/2020/04/Apply-Compound.jpg)
1/6
How to Remove a Scratch
Step Two
Press the Disk Against the Glass
While gripping the Max, press the disk flat against the glass on the scratch.
2/6
![glasweld max glass scratch remover](https://glasweld.com/wp-content/uploads/2020/04/Press-Against-Glass.jpg)
2/6
How to Remove a Scratch
Step Three
Run the Max
Using medium pressure, run the Max back and forth along the length of the scratch.
3/6
![Using medium pressure, run the Max back and forth along the length of the scratch](https://glasweld.com/wp-content/uploads/2020/04/Run-the-Max.jpg)
3/6
How to Remove a Scratch
Step Four
Add Water as Needed
Maintain a milky consistency on the glass by releasing water with the built-in water feed system.
4/6
![Maintain a milky consistency on the glass by releasing water with the built-in water feed system](https://glasweld.com/wp-content/uploads/2020/04/Add-Water-1.jpg)
4/6
How to Remove a Scratch
Step Five
Clean the Glass
Once the scratch is removed, use water and paper towels to clean the glass
5/6
![Once the scratch is removed, use water and paper towels to clean the glass](https://glasweld.com/wp-content/uploads/2020/04/Clean-the-Glasa.jpg)
5/6
Products Used:
Private: Gforce Max Kit
Shop Now